| PART |
Description |
Maker |
| JEGC0678 |
miniature chip type designed for surface mounting
|
IDEA.lnc.
|
| JRGC0678 |
miniature chip type designed for surface mounting
|
IDEA.lnc.
|
| IVGC0118 |
miniature chip type designed for surface mounting
|
IDEA.lnc.
|
| JRC0428 |
miniature lens type designed for surface mounting
|
IDEA.lnc.
|
| IUGC0428 |
miniature lens type designed for surface mounting
|
IDEA.lnc.
|
| JRGC0128 |
right-angle bi-color miniature chip type
|
IDEA.lnc.
|
| M50753-PGYS |
Piggyback
The M50753-PGYS is an EPROM mounted-type microcomputer employing a silicon gate CMOS process and was designed for developing programs for single-chip 在M50753 - PGYS是存储器安装型微机采用硅栅CMOS工艺，并负责制定项目设计的单芯片
|
Mitsubishi Electric, Corp.
Mitsubishi Electric Corporation
Mitsubishi Electric Semiconductor
|
| 12BH7-A |
The 12BH7-A is a miniature medium-mu twin troide designed primarily for use as a vertical-deflection amplifier in television receivers 2BH7 - A是小型中型亩troide主要是纵向，在电视接收器偏转放大器的使用而设
From old datasheet system
|
GE Security, Inc.
GE[General Semiconductor]
|
| SSGM640200 SSGM120100 SSGM720101 SSGM740101 SSGM76 |
2 to 10 Circuits-designed Type
|
ALPS ELECTRIC CO.,LTD.
|
| ACD81024 |
24 ports single chip 10Base-T ethernet switch designed for desktop environment.
|
Advanced Communication Devices
|
| AM29824DM AM29826DM AM29822DM AM29822LMB AM29822DM |
9-Bit D-Type Flip-Flop
Reference Design kit for the iP1206 a 300kHz, 30A Synchronous Buck Converter; A IRDCIP1206-B with Standard Packaging
Intelligent Power Module. Gate Driver IC integrated with a half bridge FredFET Designed for sub 250W Motor Drive applications in a 9-Lead SIP. RDSon of 1.0 Ohm; A IR3101 with Standard Packaging 10位D型触发器
IR1150 Demo Board designed for use in continuous conduction mode boost converter applications for power factor correction and harmonic current reduction.; A IRAC1150-300W with Standard Packaging 10位D型触发器
Octal D-Type Flip-Flop 八路D类触发器
|
Toshiba, Corp.
Electronic Theatre Controls, Inc.
ITT, Corp.
ATM Electronic, Corp.
|
| C16006 |
Asymmetric IESNA Type I (short) beam designed for tilted poles
|
Ledil, Inc.
|
